Wedge Concrete Anchor, Hex Head with Washer and Serration

Product # WABHDG124MX
Blister of 4 units
The Gator Bolt XXL, heavy-duty concrete screw fastener is a new generation of product for the construction market. The Gator Bolt XXL is a large diameter anchor with considerable pull-out values, tough corrosion resistance, simple to install, and the only large diameter concrete anchor that is also easy to remove.
Screw Size: 1/2 Length: 4 in 3 in Bit Dimensions: 1/2 Thread Count (Pitch/TPI): 2.5 Packaging format: Blister of 4 units Box of 20 Box of 100 Modify Options
Product # Screw Size Length Bit Dimensions Thread Count (Pitch/TPI) Packaging format
WABHDG124MX 1/2 4 in 1/2 2.5 Blister of 4 units
WABHDG123MX 1/2 3 in 1/2 2.5 Blister of 4 units
WABHDG123CT 1/2 3 in 1/2 2.5 Box of 20
WABHDG123 1/2 3 in 1/2 2.5 Box of 150
WABHDG124CT 1/2 4 in 1/2 2.5 Box of 20
WABHDG124 1/2 4 in 1/2 2.5 Box of 100
WABHDG14214 1/4 2 1/4 in 1/4 4 Box of 1000
WABHDG383MX 3/8 3 in 3/8 3 Blister of 4 units
WABHDG383CT 3/8 3 in 3/8 3 Box of 20
WABHDG383 3/8 3 in 3/8 3 Box of 300
WABHDG384MX 3/8 4 in 3/8 3 Blister of 4 units
WABHDG384CT 3/8 4 in 3/8 3 Box of 20
WABHDG384 3/8 4 in 3/8 3 Box of 250

ADVANTAGES AND BENEFITS

- Provides an alternative to typical wedge or sleeve with the benefit of a nicer fit and finish.
- Grips concrete without using compression; ideal for crack concrete situations or use near an edge, where wedges or sleeves cannot be used.
- Easy to remove (ideal for construction site safety railings).
- Length and size head markings allow for easy on-site inspection.
- Silver-Chem finish provides exceptional corrosion resistance and ACQ resistance (pressure treated wood chemical).
- Locking serrations under the head prevent back-out and increase resistance to vibration.
- Top strength: high pull-out and shear values.
- Low torque installation.
- Installs using standard ANSI masonry drill bits.

TECHNICAL SPECIFICATIONS

Product #
WABHDG124MX
Drive required
Hex
Finish
Hot-Dip Galvanized
Head Type
Hexagon with Washer and Serration
Point Type
Blunt
Brand
Gator Bolt XXL
Threading
Full thread
Concrete Drill Bit Included
Not Included
Minimum Hole Depth
2"
Minimum Insertion
2 in
Specific Application
Concrete
Standards and Certifications
ACQ Treatment
Material
Hot-Dip Galvanized Steel
Thread Count (PITCH/TPI) - Other Screws
2.5

APPLICATION

- Safety railings and equipment on construction sites
- Balcony railings
- Warehouse racking and garage shelving
- Accordion and pull-down shutter tracks
- Impact-resistant window systems

IMPORTANT INFORMATION

PLEASE NOTE
*You must drill a hole 1 in (25.4 mm) deeper than the insertion intended.*